XtremeRGB-Ex2+
Dual channel DVI/HD/RGB capture card
- ✓High performance DMA, direct-to-graphics-memory option
- ✓On-board processor, real-time mode/sink detection
- ✓Dynamic input source selection, admin mode
- ✓HD up to 1080p60; DVI up to 1920×1200
See real-world deployments across these applications →
This is a standard PCIe capture card — it works on its own in any Windows or Linux PC. A VSN wall controller chassis is only needed if you're building a multi-display video wall; most of our capture cards are sold and used as standalone cards in a single workstation.
→ See the full list of compatible software
About This Product
Two complete capture channels supporting up to 1920×1200 DVI or 2048×1536 analog resolution. The XtremeRGB-Ex2+ captures Analog/DVI data and triple-buffers it into onboard storage for DMA transfer to the host system, and when paired with an EMS graphics card transfers data directly to it for increased performance.
Suited to medical imaging (capturing legacy RGB modalities), multi-display presentation software, digital signage, machine vision, voyage data recorders and simulation/military command & control. Supplied with configuration software that auto-detects source format, and is compatible with Windows DirectShow-based encoding applications via built-in WDM support.
Where This Product Fits
XtremeRGB-Ex2+ is a good fit for medical imaging suites still running legacy analogue RGB modalities alongside DVI/HD sources, and for machine vision or command & control builds needing two full-resolution capture channels on one card. For a single-channel, lower-cost version of the same capability, XtremeRGB-Ex1+ covers one DVI/RGB channel; where several SD analogue sources also need capturing on the same card, XtremeRGB-Ex4+ adds four SD channels alongside one DVI/HD channel.
Why Choose the XtremeRGB-Ex2+?
- ✓High performance DMA, direct-to-graphics-memory option
- ✓On-board processor, real-time mode/sink detection
- ✓Dynamic input source selection, admin mode
- ✓HD up to 1080p60; DVI up to 1920×1200
The XtremeRGB-Ex2+ is backed by EMS's UK technical support and standard 3-year warranty (5-year extended available on most of the range) — get in touch if you're not sure it's the right fit and we'll help you spec it correctly the first time.
Full Specifications
| Board Format | PCIe x4 half-size card, 110mm x 170mm |
|---|---|
| Connectors | Two DVI-I connectors |
| Maximum Sample Rate | 170MHz analogue RGB or 165MHz DVI |
| Maximum Data Rate | Up to 650 MB/s (E2s variant) |
| Video Capture Memory | 64MB, triple buffered |
| Analogue RGB Mode Support | Up to 2048×1536, custom modes |
| HD Modes | 1080p/i, 720p, 576p/i, 480p/i via Component-DVI (HDCP not supported) |
| OS Support | Up to Windows 10, Linux |
| Warranty | 3 years |
Datasheets & Software
Download the documentation below, or contact us for anything not yet listed.
Related Products
Your Browsing History
No other products viewed yet this session.