The XtremeRGB-Ex4+ has five complete capture channels supporting a single channel for up to 1920×1080 DVI or 2048×1536 Analog resolution, plus four SD composite or S-video capture channels. Also supporting a SD maximum capture resolution of 720 x576 x 16bit.
The XtremeRGB-Ex4+ captures the Analog/DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.
When a EMS graphics card is used, the XtremeRGB-Ex4+ transfers the data directly to the graphics card thereby increasing performance. The XtremeRGB-Ex4+ sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance.
When the RGB/DVI data is displayed on a non EMS graphics card, the XtremeRGB-Ex4+ sends the data to system memory or direct to the graphics card, dependent on the software used for display
The XtremeRGB-Ex4+ is an ideal solution for applications that require the capture of an RGB/DVI source simultaneously with up to four SD video sources.
Typical applications include:
• Viewing Analog or DVI sources from a PCs, MACs, Industrial/ medical equipment, cameras and other video equipment
• Streaming video applications
• Video/ Data wall controllers
DirectShow drivers for WDM Streaming driver supports the following applications, to encode, record and stream video over networks or the internet:
• Microsoft Media Encoder®
• Adobe Flash Encoder
• Any other DirectShow encoding software
The XtremeRGB-Ex4+ is supplied with a powerful software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI, Analog or video source into the card, run the VisionSD4+1S application to automatically detect the video source format and display the captured video in a window on your desktop.