XtremeRGB-Ex1+

Call for Price

Single channel DVI/RGB analog video capture card

  • Four Lane PCI Express interface with a maximum data rate of 650 MB/sec
  • On card processor for real time mode and sink detection
  • Support for multiple capture cards allowing up to 32 capture channels (32 cards)
  • Maximum analog RGB video capture resolution of 2048×1536 x24bit
  • Maximum DVI capture resolution of 1920×1200 x24bit

The XtremeRGB-Ex1+ is a suitable solution for applications that require the capture of analog or DVI sources in real time, such as viewing Analog or DVI sources …

Description

Single channel video capture card

The XtremeRGB-Ex1+ captures the Analog/ DVI data and triple buffers it into onboard storage. This data is then copied using DMA to the host system for display, storage or streaming.

When a EMS graphics card is used, the XtremeRGB-Ex1+ transfers the data directly to the graphics card thereby increasing performance. The XtremeRGB-Ex1+ capture card sends the relevant portions of each captured image to each display channel and instructs each channel to use its graphics engine to render the data. This fully utilises the hardware and dramatically increases performance.

When the RGB/DVI data is displayed on a non EMS graphics card, the XtremeRGB-Ex1+ sends the data to system memory or direct to the graphics card, dependent on the software used for display.

The VisionRGB-E1S is an ideal solution for applications that require the capture of analog or DVI sources in real time. Typical applications include:

  • Viewing Analog or DVI sources from PCs, MACs, industrial or medical equipment, cameras and other video equipment
  • Streaming video applications
  • Video wall controllers

RGB Streaming

The XtremeRGB-Ex1+ is an ideal solution for applications that require the capture of analog or DVI sources in real time. Typical applications include: Viewing analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other video equipment Streaming video applications and video wall controllers.

Video Streaming Support

Direct WDM streaming driver supports the following applications, to encode, record and stream video over networks or the internet:

  • Dataton WatchOut
  • Microsoft Expression Encoder
  • Microsoft Windows® Media Encoder
  • VideoLAN VLC
  • NorPix StreamPix
  • VitualDub
  • Adobe Flash Encoder
  • VidBlaster
  • AMCap and other DirectShow compatible software

Software

The XtremeRGB-Ex4+ video capture card is supplied with a powerful software application for configuring the timing and format of the input sources and displaying the data. Simply connect your external DVI, Analog or video source into the card, run the XtremeRGB-Ex4+ application to automatically detect the video source format and display the captured video in a window on your desktop.

For further details see the EMS DirectShow SDK documentation supplied as part of a typical installation.

Specifications

Board Format PCI Express x4 low profile card, 68.9mm x 167.6mm
PCI Express bus master with scatter gather DMA providing
Maximum data rate of 650 MB/s
Connectors One DVI-I type connector
Maximum Sample Rate170 MHz analogue RGB or 165 MHz DVI
Analogue modes up to 340 MHz pixel clock can be captured using dual-pass sampling
Video SamplingRGB: 24 bits per pixel/ 8-8-8 format
Video Capture Memory32 MB, triple buffered
Analogue RGB mode support640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080, 2048x1536, custom modes
DVI Single-link Mode Support 640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080, 1920x1200, custom modes
HD Modes1080p, 1080i, 720p, 576p, 576i, 480p and 480i using a Component-DVI connector (HDCP not supported)
Input Modes DetectionAutomatic detection of input modes in hardware, enabling the tracking of mode changes in the source signal
Pixel Transfer FormatsRGB: 5-5-5, 5-6-5 or 8-8-8 (24 bit/32 bit) pixels
YUV: 4:2:2
Mono: 8 bit
Update RateUser defined, captured frame rate will match the source. Providing max data rate (650 MB/s) is not exceeded
Multi-buffered to eliminate tearing artifacts
Video Format OptionsAnalogue RGB plus HSink and VSink (5 wire)
Analogue RGB with Composite sink (4 wire)
Analogue RGB with Sync on Green/ YPbPr (3 wire)
DVI Single Link
Operating system supportUp to Windows® 10 Linux support (NOTE: Check Linux specific features with Sales)
Power RequirementsMax current at +3.3V - 0.25A
Max current at 12V - 0.5A
Max power - 6.8 Watts
Operating Temperature0 to 35 °C/ 32 to 96 °F
Storage Temperature-20 to 70 °C/ -4 to 158 °F
Relative Humidity5% to 90% non-condensing
Warranty3 years

Accessories

MODELS AVAILABLE

Order Code: XtremeRGB-Ex1+
A single channel capture card, 1 x DVI/ VGA, 1 x DVI/component and 1 x DVI/HDMI adapters, 1 x low card bracket

Downloads

For Datasheets, User Manuals, Software & Drivers; Download Here

 

TOP