XtremeDV-HD2+

Description

XtremeDV-HD2 header image

  • The XtremeDV-HD2+ is a 4 lane PCI Express capture card with three video capture inputs - two supporting HD capture and a third supporting SD composite video, these three independent video channels can be captured simultaneously. The XtremeDV-HD2+ also adds multiple channels of audio capture, which can be synchronised in software using time stamping with all video capture channels.

    • 4 lane PCIe lane bus, Net 1.6 GB/s total capture bandwidth
    • Triple channel PCI Express capture card
    • Two DVI-I capture channels
    • HDMI/ DVI/ TGB/ YPbPr video capture

    • HDMI embedded Audio Capture and streaming

    • Low input to output capture latency
    • SD/Composite capture channels
    • PAL, NTSC, SECAM up to 720 x 576 @ 16 Bit colour

    • Direct DMA to graphics memory of third party graphics cards
    • All standard features of the Xtreme range of video capture cards
    • Driver support included within the EMS unified Windows driver
    • Driver support included with the EMS unified Linux driver

    This half length full height card features a full mechanical sixteen lane connector with notches which will enable it to fit 4, 8 and 16 lane motherboard connectors. The XtremeDV-HD2+ also adds embedded audio capture from the HDMI signal, which can be sychronised with the respective video channel. This video capture card provides balanced and unbalanced analogue audio capture, through an optional audio module This provides a single flexible card solution for areas such as medical, lecture capture, web casting and video conferencing.


    cd XtremeRGB Software
    The XtremeRGB is supplied with a stand-alone software application, simply connect your external DVI or Analog source into the card, run the XtremeRGB application to automatically detect the video source format and display the captured video in a window on your desktop. For multiple inputs the application can be executed multiple times, each capture is displayed in its own independent desktop window. The captured video data is displayed in a desktop window with/without menu/borders, can be resized up/down, overlapped and/or maximized to full screen display.
    The EMS application also enables you to configure the timing and format of the input sources as well as brightness, contrast, hue etc ...  

    filmstrip XtremeRGB Streaming
    For streaming applications EMS include WDM drivers, hence any Directshow compatible software can be used such as, Windows Media Encoder/Expression, VLC, Vidblaster, HDwave, Watchout, Adobe Connect etc ...
    The XtemeRGB-Ex1 is an ideal solution for applications that require the capture of DVI/HDMI/VGA or Component sources in real-time.


    softwareSoftware Development Kit (SDK) for developers/integrators
    The XtremeRGB is supplied with a powerful SDK for own application development, many source code examples are included to help reduce the development time.
    Also included are Directshow source code examples.
  • A capture card with 2 channels of HD DVI video and an extra composite video input all operating simultaneously and independently; with full analogue and digital audio support.


    PRODUCT OVERVIEW:

    The XtremeDV-HD2+ is a 4 lane PCI Express capture card with three video capture inputs - two supporting HD capture and a third supporting SD composite video, these three independent video channels can be captured simultaneously. The XtremeDV-HD2+ also adds multiple channels of audio capture, which can be synchronised in software using time stamping with all video capture channels.

    This half length full height card features a full mechanical sixteen lane connector with notches which will enable it to fit 4, 8 and 16 lane motherboard connectors.


    The XtremeDV-HD2+ also adds embedded audio capture from the HDMI signal, which can be sychronised with the respective video channel. This video capture card provides balanced and unbalanced analogue audio capture, through an optional audio module (the EMS AM2)


    This provides a single flexible card solution for areas such as medical, lecture capture, web casting and video conferencing.

    Windows Media Encoder Adobe flash adobe connect hdwave broadcast
    vlc amcap microsoft expression vidblaster
      virtualdub watchout streampix

     

  • SPECIFICATION OF THE XtremeDV-HD2+ CAPTURE CARD:

    Board format PCI Express x4 half size plug-in card, 110mm x 170mm
    Connectors (main board) 2 x DVI-I, 1 x RCA (female)
    HDMI capture

    Supports HDMI 1.3 to 225 MHz (inlcuding deep colour modes) For HDCP support, contact the Sales department for more information

    HDMI audio can be selected as source for audio streaming

    Incorporates TMDS equaliser to support up to 20m cables

    DVI capture

    Supports DVI 1.0 RGB 24bit capture to 165MHz

    Incorporates TMDS equaliser to support up to 20m cables

    VGA/ YPbPr Capture      

    Triple ADCs sampling up to 170Msps. Full 4:4:4 sampling, 8bits per colour

    5-wire, 4-wire or sync-on-green signal format

    Composite video capture                      CCIR601 sampling, PAL, NTSC, SECAM formats automatically detected
    Audio capture

    Stereo Line-In/ Stereo balanced inputs with programmable gain (+/-12dB)

    16bit sampling at 44.1/ 48/ 96kHz

    Analogue stereo line-out for direct passthrough of selected input at up to 64kHz sampling, sourced from Analog input or HDMI channel

    Video capture memory

    256MB high bandwidth frame buffer supports triple buffering of HD and SD video

    Local storage of complex scatter-gather tables for DMA engine (elimintates read overhead)

    Video processing

    Polyphase FIR scaling engine (7x5) for hardware downscaling and upscaling

    Colour space conversion allows captured data to be transferred in any format:

    • RGB 16 bit (5-5-5, 5-6-5), 24 bit (8-8-8) or 32 (8-8-8 alpha)
    • YUV 16 bit (4:2:2)
    • Mono: 8 bit
    DMA engine

    Direct DMA to physical or virtual memory buffers with full scatter-gather support

    DMA bandwidth: up to 800MB/s

    16 independent DMA streams: Any mix of HD and SD sources, colour space, cropping and scaling parameters

    Operating system support Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows Server 2012, Windows 7, Windows 8 and Linux support (not audio*) See www.datapath.co.uk for updates
    Power requirements

    Max current at 12V - 1A

    Max current at 3.3V - 1A

    Thermal dissipation - 15.5 W

    Operating temperature 0 to 35 Celsius (32 to 96 Faranheit)
    Storage temperature -20 to 70degrees Celsius (-4 to 158 Faranheit)
    Relative humidity 5% to 90% non-condensing
    Warranty 3 years

     

    We are continously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.

  • Listed below are all the items included when you order the XtremeDV-HD2+ video capture card.

    XtremeHD-2 dvi-vga component dvi
    Video Capture Card 1x DVI-A to VGA adapter adapters 1x DVI to YPbPr adapter
    hdmi dvi adapter user guide ems cd
    1x DVI to HDMI adapter User Guide EMS Installation
    CD

  • Here you can download our Datasheets, Manuals, Application and Drivers


    pdf
    tab
    XtremeDV-HD2+ Video Capture Card Datasheet
    manuals

    tab
    XtremeRGB User Manual This manual covers the entire Xtreme range of video capture cards
    drivers
    tab







    Xtreme range of video capture Application and Install Drivers.
    This applies to the XtremeRGB range and the XtremeSDI-2, XtremeDVI-DL1
    linux


    click here to download the Linux driver.
    sdk

    tab
    View the application areas View different areas of application in which EMS products have been integrated.




Share this product