XtremeAV-HD1+

Call for Price

Two Channel Video Capture Card

  • HDMI, DVI, RGB, YPbPr, composite video and analogue audio capture
  • High quality up/down scaling (7×5 Polyphase Filter)
  • Flexible Audio Capture
  • Multiple channel audio and video capture
  • Small form factor low power consumption
  • On card processor for real time mode detection
  • Support for Windows and Linux (NOTE: Check Linux specific features with Sales)

Provides simultaneous SD and HD video capture through one channel of DVI-I or HDMI capture and one channel of composite video capture.

Description

Two Channel Video Capture Card

Provides simultaneous SD and HD video capture through one channel of DVI-I or HDMI capture and one channel of composite video capture.

The XtremeAV-HD1+ is a four lane PCI Express capture card providing up to 800MB/s bandwidth from the capture engine. The XtremeAV-HV1+ has up to 256 MB buffer memory, enabling triple buffering for all video modes for tear free play back. It can also capture digital video for progressive and interlaced modes up to 4096×4096 resolutions to a maximum of 165 MHz pixel clock for DVI and 170 MHz for analogue RGB. This card provides HDMI audio capture and streaming from DVI Channel, as well as balanced and unbalanced analogue audio capture.

The XtremeAV-HD1+ has two independent video capture channels – one supporting HD capture and a second simultaneously accepting Standard Definition composite video. The XtremeAV-HD1+ also adds analog audio capture, which can be perfectly synchronised with either video capture channel.

The High Definition signals are input via a DVI-I connector and can support HDMI, DVI, RGB and analog Component (YPbPr) video formats all at resolutions up to 4096 x 4096 pixels and supports 1080p (1920×1080) at 60 frames per second. The Standard Definition channel accepts composite video on a single RCA connector and can auto-detect between PAL, NTSC and SECAM formats up to 720×576 at 16 bit colour.

The XtremeAV-HD1+ captures both video channels simultaneously and triple buffers them into onboard storage, alongside an audio stream that can be selected from the HDMI or analogue audio port. This data can then be processed and copied using DMA transfers to the host system for display, storage or streaming.

Applications

The XtremeAV-HD1+ is an ideal solution for applications that require the capture of analogue or DVI sources in real time. Typical applications include capturing analog or DVI sources from PCs, MACs, industrial/medical equipment, cameras and other video equipment streaming video applications and video wall controllers.

Adding support for simultaneous analogue and digital audio capture makes this a versatile capture card for streaming, webcasting, video conference and many other applications.

Video Streaming Support

Direct WDM streaming driver supports the following applications, to encode, record and stream video over networks or the internet:

  • Dataton WatchOut
  • Microsoft Expression Encoder
  • Microsoft Windows® Media Encoder
  • VideoLAN VLC
  • NorPix StreamPix
  • VitualDub
  • Adobe Flash Encoder
  • VidBlaster
  • AMCap and other DirectShow compatible software

For further details see the EMS DirectShow SDK documentation supplied as part of a typical installation.

Software

A single XtremeAV device supports up to 16 independent scale factors, colour spaces and frame rate clients, which enables multiple streams to be sent to and from the card at the same time in different formats.

Supports timestamp for capture synchronisation across inputs, cards and systems.
For the use with edge blending, frame stitching, stereoscopic and many more applications using gen-locked sources.

Flexible and configurable preferred mode EDID Management
Allows programming of custom EDID parameters including ‘Preferred Mode’

Low input to output capture latency
DMA to third party graphics vendors back and front buffers via Direct3D
Compatibility with AMD DirectGMA
Compatibility with Nvidia GPUDirect

Signal detection
XtremeAV-HD1+ capture card detection of HDMI, DVI, VGA 5 wire, 4 wire, 3 wire, component and composite video, balanced, unbalanced and digital audio detection.
Additional Vision cards include video capture for SDI and DL-DVI input

Software Interfaces

XtremeDV driver & command line interface
Supplied with a standard application for full control of any Vision capture card, this includes GUI’s for window properties, input settings, on screen display and EDID configuration.
The XtremeAV application also includes a comprehensive command line interface for all GUI controls.

RGBEasy*
SDK for advanced audio and video control
Sample applications including low latency DirectX rendering

DirectShow
DirectShow SDK
Sample applications including AV encoding
SDK diagnostic transform filters
Kernel Mode – WDM video capture filters (crossbar required)
User Mode – Additional support for PiP, IAMStream control and cropping

Specifications

Board Format PCI Express x4 half size plug-in card, 110mm x 170mm
Connectors (main board)2 x DVI-I, 1 x RCA (female)
HDMI Capture Supports HDMI 1.3 to 225 MHz (inlcuding deep colour modes) HCDP is supported when used with Datapath graphics cards
HDMI audio can be selected as source for audio streaming
Incorporates TMDS equaliser to support up to 20m cables
DVI CaptureSupports DVI 1.0 RGB 24 bit capture to 165 MHz
Incorporates TMDS equaliser to support up to 20m cables
VGA/ YPbPr CaptureTriple ADCs sampling up to 170Msps. Full 4:4:4 sampling, 8bits per colour
5-wire, 4-wire or sync-on-green signal format
Composite Video CaptureCCIR601 sampling, PAL, NTSC, SECAM formats automatically detected
Audio CaptureStereo Line-In/ Stereo balanced inputs with programmable gain (+/-12dB)
16 bit sampling at 44.1/ 48/ 96 kHz
Analogue stereo line-out for direct passthrough of selected input at up to 64kHz sampling, sourced from analogue input or HDMI channel
Video Capture Memory256MB high bandwidth frame buffer supports triple buffering of HD and SD video
Local storage of complex scatter-gather tables for DMA engine (eliminates read overhead)
Video ProcessingPolyphase FIR scaling engine (7x5) for hardware downscaling and upscaling
Colour space conversion allows captured data to be transferred in any format:)
•RGB 16 bit (5-5-5, 5-6-5), 24 bit (8-8-8) or 32 (8-8-8 alpha)
• YUV 16 bit (4:2:2)
•Mono: 8 bit
Video Capture Memory256MB high bandwidth frame buffer supports triple buffering of HD and SD video
Local storage of complex scatter-gather tables for DMA engine (eliminates read overhead)
DMA EngineDirect DMA to physical or virtual memory buffers with full scatter-gather support
DMA bandwidth: up to 800 MB/s
16 independent DMA streams: Any mix of HD and SD sources, colour space, cropping and scaling parameters
Operating System SupportUp to Windows ® 10 and Linux support (NOTE: Check Linux specific features with Sales)
Power RequirementsMax current at 12V - 1A
Max current at 3.3V - 1A
Thermal dissipation - 15.5 W
Operating Temperature 0 to 35 °C/ 32 to 96 °F
Storage Temperature -20 to 70 °C/ -4 to 158 °F
Relative Humidity5% to 90% non-condensing
Warranty3 years

Accessories

MODELS AVAILABLE

Order Code: XtremeAV-HD1+/F
Capture card, Audio Module, full height bracket (for both cards), 1 x short ribbon cable and 1 x Audio Breakout Cable
Also supplied with DVI/VGA Adapter, DVI/HDMI Adapter, DVI/Component Adapter

Order Code: XtremeAV-HD1+/H
Capture card, Audio Module, half height bracket (for each card), 1 x long ribbon cable and 1 x Audio Breakout Cable
Also supplied with DVI/VGA Adapter, DVI/HDMI Adapter, DVI/Component Adapter

Order Code: XtremeAV-HD1+/B
Capture card, fitted with full height bracket
Also supplied with half height bracket, DVI/VGA Adapter, DVI/HDMI, Adaper. DVI/Component Adapter

Downloads

For Datasheets, User Manuals, Software & Drivers; Download Here

 

TOP