Diagnostic Suite

Version 1.5.2

• Fixed a problem which meant the ActiveSQX utilisation statistics did not update reliably. [B# 23825]
• Disabled the Diagnostics Snapshot option when connected to a system remotely. This function must be run directly on the target machine as it requires Administrator access rights. [B# 23782]
• Fixed a bug which resulted in the additional information required for a Diagnostics Snapshot being omitted the recorded file. [B# 23781]
• Adjusted the power ranges used to validate the operation of a number of Asrock motherboard. [B# 23817]
• Fixed a problem which resulted in the XtremeVision-Pro serial number being displayed incorrectly. [B# 23617]
• Fixed a problem with meant the "Snapshot Information" field reported inaccurate information about the open file. [B# 23780]
• Fixed a problem with the display of the motherboard graphic on some systems. [B# 23776]

Version 1.5.1

• Fixed a problem which would cause the tool to crash when used on a system without an English language locale. [B# 23366]
• Fixed a problem which could cause the application to crash due to a scaling mismatch in the desktop capture image. [B# 23367]
• Fixed a problem running the Diagnostics Suite on systems running Driver Install versions before V4.5.0. This was caused by a missing Microsoft redistributable. [B# 23402]
• Updated some of the SBC graphics used by the backpanel printer. [B# 23431]

Version 1.5.0

• Significant performance improvements when running the tool in the background. [F# 22394]
• Added new .snpx format for snapshot files that provides a much more compact format. [F# 21515]
• Added a number of new system graphics for use in the backpanel printout. [F# 22890]
• Added a number of new graphics for plug-in cards for use in the backpanel printout. [F# 22364]
• Added HDCP status to video signal capture history, and capture channel diagnostics. [F# 22823]
• Added Bios Version and Serial Numbers to the graphics card information page, where available. [F# 22667]
• Fixed a problem that would result in a Server Installation displaying the Diagnostics Suite window when logging in. [B# 22373]
• Fixed the ordering of events listed in the Event Viewer so that they are displayed with the most recent events first. [B# 22366]
• Fixed a problem that would result in an ActiveSQX reporting a warning if it is not being utilised. [B# 23164]
• Updated the capture "Signal History" to correct the names of the columns and to ensure the event times reported are in the same locale as the system time. [B# 22586, 22634]
• Corrected some problems with remote connections to a Diagnostics Suite server resulting in client crashes. [B# 23079, 23174]
• Corrected some problems identifying the slot and chassis a card is installed in. [B# 23165, 22929, 22104]
• Fixed a problem upgrading a server installation of the Diagnostics Suite. [B# 23129]

Version 1.4.1 - 11^th September 2018

• Fixed a problem mapping the screens to onto the desktop preview when running on the XtremeVision-Pro WDDM driver.
• Fixed a problem could cause the Diagnostics Suite to report that the outputs of an XtremeVision-Pro were not gen-locked when the were really synchronised correctly.

Version 1.4.0 - 17^th August 2018

• Added support for new hardware
• Fixed issues where certain outputs would not be selectable or shown in the tool
• Added better handling of corrupted configuration files
• Improved handling of loading old snapshot files
• Added option to save full diagnostic snapshots containing low level diagnostic information and full system memory dumps

Version 1.3.0 - 28^th November 2017

• UI and theming Refresh
• Output synchronisation is now shown live, rather than showing the configured genlock chains
• Input FPS is now shown for each capture channel
• Display timings are now shown for each screen
• Wall preview now excludes the control screens to improve capture performance
• Hardware sample rates are now capped to a maximum of twice every second, to improve performance
• Added event logs viewer
• Added test pattern generator tool

Version 1.2.2 - 26^th September 2017

• Fixed crash when changing desktop resolution with WDDM driver
• Fixed bug causing only the first virtual display's displays to be shown in the wall preview

Version 1.2.1 - 6^th August 2017

• Fixed slot numbering in backpanel printer tool
• Fixed crash when launching on system without live hardware

Version 1.2.0 - 7^th July 2017

• Added system backpanel printer tool

Version 1.1.3 - 2^nd March 2017

• Added exit option to file menu
• Displayed snapshot creation date and time in window title
• Fixed crash caused by additional display drivers being installed
• Fixed issue preventing multiple instances of the diagnostic suite running at a time
• Fixed issue preventing genlock chains from being displayed

Version 1.1.2 - 15^th December 2016

• Fixed wall preview scaling issue
• Fixed slow performance when saving or loading system snapshots

Version 1.1.1 - 30^th November 2016

• Wall view now correctly resizes
• Fixed issues with missing information being displayed
• Fixed parsing of registry data
• Fixed ActiveSQX devices with missing drivers not causing warnings or errors

Version 1.1.0 - 11^th November 2016

• Added graphical system tree
• Validation options can now be saved and are automatically loaded on startup
• Added input channel diagnostics

Version 1.0.0 - 22^nd October 2016

• Initial release.